====== Baileigh brake and sheer ======

{{:equipment:20200901_184848.jpg?direct&400|}}

This machine includes a brake, sheer, and roll.  The brake can be used for making sharp, precise bends in sheet metal.  The sheer is used to cut sheet metal.  And the roll is used to give a gentle curve to sheet metal.

The manual can be found [[http://www.baileigh.com/media/uploads/manuals/SBR-5216_12-2015.pdf|here]].

===== Safety =====

  * Safety glasses are **always** required.

===== Special Instructions =====

  * Line up the sheet metal where you want it to be cut or bent.
  * Pull down on the lever.

===== Details =====

{{:equipment:20200901_184854.jpg?direct&400|}}

{| class="wikitable"
|**Attribute**
|**Detail**
|-
|Manufacturer
|Baileigh Industrial
|-
|Model
|SBR-5216
|-
|Bed width
|52 inches (1312mm)
|-
|Sheer capacity
|16 gauge (0.060 inches, 1.90mm) mild steel, or .039 inches stainless steel
|-
|Brake capacity
|16 gauge (0.060 inches, 1.90mm) mild steel, or .039 inches stainless steel
|-
|Roll capacity
|16 gauge (0.060 inches, 1.90mm) mild steel, or .039 inches stainless steel
|-
|Maximum bend angle
|90 degrees
|-
|Minimum roll diameter
|2.38 inches (60.5mm)
|-
|Box depth
|4 inches
|-
|Frame and base material
|Cast iron
|-
|Brake material
|Ground steel w/ hardened edge
|-
|Sheer table material
|Precision ground cast iron
|-
|Sheer blade material
|Hardened steel
|-
|Sheer hold-down clamp material
|Spring loaded cast iron
|-
|Power requirement
|Manual (raw muscle power, aided by some leverage)
|-
|Owner
|ChattLab
|-
|}