~~NOTOC~~
====== FabLab ======
The FabLab gives us the ability to bring our ideas into physical form. We mainly use 3D printers for Modeling and Laser Cutters for 2D Cutouts.

===== Rules =====

  * **Do not leave trash in the FabLab!**
  * If you are working on a project and must leave, please leave a dated note to prevent others from disturbing it.  If a project is without a note, has been left longer that 48 hours, or is an obstruction to others' projects, it may be moved.
  * Leave the existing workstations in the same state as they were before you used them.  Software updates and new software for your projects are fine.  If a new program starts an item on boot, please disable it.
  * Report any maintenance issues as soon as possible.  This includes the facility, hardware and software.
  * If you wish to use other operating systems, only run them off removable media.  The PCs have software that is expensive and its integrity should be respected.
  * Do not use the PCs to view pornographic material.  Neither members nor their guests should be made to feel uncomfortable.
  * Do not set the heat higher than 25C.  This is to prevent damage to hardware and ensure the comfort of members.


===== Clean Up =====

  * Return chairs to the workstations if you move them.
  * Leave a clear area for others to work on repair if you are working on a hardware project.
  * If you see trash, throw it out, even if it is not yours.
  * If something presents a trip hazard, please move it.
  * Turn off the lights if you are the last person to leave.

===== Equipment =====
  * {{page>[pc_inventory#pc_lab_computers]&firestseconly&link&nouser}}
  * {{page>[Computers]&firstseconly&link}}
  * {{page>[Printers]&firstseconly&link}}
  * {{page>[Miscellaneous]&firstseconly&link}}

===== Frequently Asked Questions =====

===== Support Contacts =====
{| class="wikitable"
! style="text-align: center;" | Contact Link
! style="text-align: center;vertical-align:middle;" | Description
|-
|[[EquipmentRequest|Equipment/Material Request]]
| This form will allow members to request new equipment or supplies.
|-
|[[contact_wiki|Wiki Updates]]
| Click here to report something wrong with the FabLab page.
|}